Ultranitril 358
Designed with an embedded optimal grip to safely handle tasks in dry & greasy environments
-
CAT. 3
0334
-
3111A
-
Type A
AJKOPT
-
-
X1XXXX
-
-
ISO 13997:
4.9N (499g) -
Suitable for food use with some types of food in accordance with European Regulation (EC) 1935/2004. Find out details on the food chart below.
Download the technical data sheet
Download other documents
Got a question? Contact
Specific advantages
Thermal protection
- Hand comfort and thermal insulation.
Comfort
- Very supple glove providing high dexterity
- Good fingertips sensitivity
Productivity
- Optimal grip to improve productivity, reduce hand fatigue and enhance safety
Guaranteed quality
- Silicone free to prevent traces, defects on metal sheet and glass prior to painting
Care for the environment
- Plastic packaging optimized
- Recycled material in the packaging: 30 %
Applications
Automotive/mechanical industry
- Automotive assembly
Chemical industry
- Chemical product blending
- Handling drums of chemical products
Petrochemical industry
- Maintenance and handling
Cosmetics and Pharmaceutical industry
- Handling in laboratories
Agriculture sector
- Spray mixtures preparation
- Pesticides handling
- Tank filling
- Application & spreading of pesticides
- Pesticides waste management
- Treatment equipment cleaning
Technology
Patterns embedded in the glove providing high-performance grip for tasks in dry and greasy environments.
Product detail
| Material | Nitrile |
|---|---|
| Colour | green |
| Interior finish | Textile support Mapa Technology |
| Exterior finish | Reinforced grip |
| Length (cm) | 36 |
| Thickness (mm) | 1,1 |
| Size | 6 7 8 9 10 11 |
| Packaging | 12 pairs/bag 72 pairs/carton |
Chemical chart
OVERALL CHEMICAL PROTECTION RATING
Protection rating is determined by taking into account the effects of both permeation and degradation in an attempt to provide users with an overall protection guideline when using our glove products against specific chemicals.
Meaning of the colours :
The chemical test data and overall chemical protection rating should not be used as the absolute basis for glove selection. Actual in-use conditions may vary glove performance from the controlled conditions of laboratory tests. Factors other than chemical contact time
| Chemical Product | CAS # | Breakthrough time (minutes) |
Permeation level |
Standard | Degradation level |
Rating |
|---|---|---|---|---|---|---|
| 1,1,2-Trichlorotrifluoroethane (Freon TF or Freon 113) 99% | 76-13-1 | >480 | 6 | ASTM F739 | 4 |
|
| 1,2 - dichloroethane 99% | 107-06-2 | 2 | 0 | EN 16523-1:2015 | NT |
|
| 2-Propanol (Isopropanol) 99% | 67-63-0 | >480 | 6 | ASTM F739 | 4 |
|
| Acetaldehyde 99% | 75-07-0 | 3 | 0 | ASTM F739 | NT |
|
| Acetic acid 60% | 64-19-7 | >480 | 6 | EN 16523-1:2015 | NT |
|
| Acetic acid 99% | 64-19-7 | 54 | 2 | EN 16523-1:2015 | 2 |
|
| Acetone 99% | 67-64-1 | 3 | 0 | EN 16523-1:2015 | 1 |
|
| Acetyl Chloride 98% | 75-36-5 | 1 | 0 | ASTM F739 | NT |
|
| Acrylic acid 25% | 79-10-7 | 478 | 5 | EN 16523-1:2015 | NT |
|
| Ammonium hydroxide solution 25% | 1336-21-6 | 246 | 5 | EN 16523-1:2015 | 4 |
|
| Benzene 99% | 71-43-2 | <1 | 0 | EN 16523-1:2015 | 2 |
|
| Bromobenzene 99% | 108-86-1 | 8 | 0 | EN 16523-1:2015 | NT |
|
| Butyl Acetate 99% | 123-86-4 | 20 | 1 | EN 16523-1:2015 | 2 |
|
| Carbon disulfide 99% | 75-15-0 | <1 | 0 | EN 16523-1:2015 | NT |
|
| Carbon Tetrachloride 99% | 56-23-5 | 194 | 4 | EN 16523-1:2015 | 4 |
|
| Cyclohexane 99% | 110-82-7 | >480 | 6 | EN 16523-1:2015 | 4 |
|
| Dichloromethane (Methylene Chloride) 99% | 75-09-2 | 1 | 0 | ASTM F739 | NT |
|
| Diethanolamine 97% | 111-42-2 | >480 | 6 | ASTM F739 | 4 |
|
| Dimethylformamide 100% | 68-12-2 | 6 | 0 | EN 16523-1:2015 | NT |
|
| Dimethylsulfoxide 99% | 67-68-5 | 79 | 3 | EN 16523-1:2015 | 3 |
|
| Ethanol 95% | 64-17-5 | 212 | 4 | EN 16523-1:2015 | 4 |
|
| Ethyl acetate 99% | 141-78-6 | 5 | 0 | EN 16523-1:2015 | 1 |
|
| Ethyl benzene 99% | 100-41-4 | 11 | 1 | EN 16523-1:2015 | 2 |
|
| Ethylene glycol 99% | 107-21-1 | >480 | 6 | ASTM F739 | 4 |
|
| Formaldehyde 37% | 50-00-0 | >480 | 6 | EN 16523-1:2015 | 4 |
|
| Formic Acid 96% | 64-18-6 | 29 | 1 | EN 16523-1:2015 | NT |
|
| Fuel oils mixture | 68476-34-6 | >480 | 6 | EN 16523-1:2015 | 3 |
|
| Hexamethylene Diisocyanate (1,6 - Diisocyanatohexane) 99,9% | 822-06-0 | >480 | 6 | EN 16523-1:2015 | 2 |
|
| Hydrazine 35% | 302-01-2 | >480 | 6 | ASTM F739 | 4 |
|
| Hydrazine 70% | 302-01-2 | >480 | 6 | ASTM F739 | 4 |
|
| Hydrochloric acid 10% | 7647-01-0 | >480 | 6 | EN 16523-1:2015 | 4 |
|
| Hydrochloric acid 37% | 7647-01-0 | >480 | 6 | ASTM F739 | 4 |
|
| Hydrogen peroxide 30% | 7722-84-1 | >480 | 6 | EN 16523-1:2015 | 4 |
|
| Isobutyl alcohol 99% | 78-83-1 | >480 | 6 | ASTM F739 | 4 |
|
| Kerosene mixture | 8008-20-6 | >480 | 6 | ASTM F739 | 4 |
|
| Methanol 99% | 67-56-1 | 37 | 2 | EN 16523-1:2015 | 4 |
|
| Methyl Ethyl Ketone (2-Butanone) 99% | 78-93-3 | 2 | 0 | EN 16523-1:2015 | 1 |
|
| n-Heptane 99% | 142-82-5 | >480 | 6 | EN 16523-1:2015 | 4 |
|
| n-hexane 95% | 110-54-3 | >480 | 6 | ASTM F739 | 4 |
|
| Naphtha mixture | 8030-30-6 | >480 | 6 | ASTM F739 | 4 |
|
| Naphtha VM&P mixture | 8032-32-4 | >480 | 6 | ASTM F739 | 4 |
|
| Naphtha, Hydrotreated Heavy mixture | 64742-48-9 | >480 | 6 | EN 16523-1:2015 | 4 |
|
| Nitric acid 65% | 7697-37-2 | 50 | 2 | EN 16523-1:2015 | 3 |
|
| Phenol 85% | 108-95-2 | 49 | 2 | EN 16523-1:2015 | 3 |
|
| Phosphoric acid 75% | 7664-38-2 | >480 | 6 | ASTM F739 | 4 |
|
| Phosphoric acid 85% | 7664-38-2 | >480 | 6 | ASTM F739 | 4 |
|
| Potassium Fluoride 40% | 7789-23-3 | >480 | 6 | ASTM F739 | 4 |
|
| Potassium Hydroxide 50% | 1310-58-3 | >480 | 6 | EN 16523-1:2015 | 4 |
|
| Propylene Oxide 99% | 75-56-9 | 2 | 0 | ASTM F739 | NT |
|
| Sodium hydroxide 20% | 1310-73-2 | >480 | 6 | EN 16523-1:2015 | 4 |
|
| Sodium hydroxide 40% | 1310-73-2 | >480 | 6 | EN 16523-1:2015 | 4 |
|
| Sodium hydroxide 50% | 1310-73-2 | >480 | 6 | EN 16523-1:2015 | 4 |
|
| Spent Acid mixture | NA | >480 | 6 | ASTM F739 | NT |
|
| Styrene 99% | 100-42-5 | 5 | 0 | EN 16523-1:2015 | 1 |
|
| Sulfuric acid 10% | 7664-93-9 | >480 | 6 | EN 16523-1:2015 | 4 |
|
| Sulfuric acid 40% | 7664-93-9 | >480 | 6 | EN 16523-1:2015 | 4 |
|
| Sulfuric acid 50% | 7664-93-9 | >480 | 6 | ASTM F739 | 4 |
|
| Sulfuric acid 96% | 7664-93-9 | 84 | 3 | EN 16523-1:2015 | 1 |
|
| t-Butyl Methyl Ether 99% | 1634-04-4 | 193 | 4 | EN 16523-1:2015 | NT |
|
| Tetrachloroethylene (Perchloroethylene) 99% | 127-18-4 | 72 | 3 | EN 16523-1:2015 | 3 |
|
| Toluene 99% | 108-88-3 | 8 | 0 | EN 16523-1:2015 | 2 |
|
| Trichloroethylene 99% | 79-01-6 | 4 | 0 | EN 16523-1:2015 | 1 |
|
| Triethanolamine 98% | 102-71-6 | >480 | 6 | ASTM F739 | 4 |
|
| Triethanolamine 99,4% | 102-71-6 | >480 | 6 | EN 16523-1:2015 | 4 |
|
| Turpentine mixture | 8006-64-2 | >480 | 6 | ASTM F739 | 4 |
|
| Unleaded gasoline 100% | 8006-61-9 | 214 | 4 | EN 16523-1:2015 | NT |
|
*not normalized result
Need help finding the right chemical glove?
Discover our SAFE CHEM selection tool for chemical protection!
Do you have a question? Contact us!
If you have a question, need a sample or would like further technical information about our gloves and their use.
More gloves
New
Ultranitril 410
Ideal glove for operations where cut and chemical protection are required, offering excellent durability and optimal grip.
