Ultranitril 381
Maximum comfort and chemical protection
-
3111A
-
Type A
AJKLOPT
-
-
X1XXXX
-
Download the technical data sheet
Download other documents
Got a question? Contact
Specific advantages
Thermal protection
- Added comfort and thermal insulation, due to the cotton-knit lining
Comfort
- Extremely supple, due to the unique Mapa multi-layer process
Productivity
- Good grip on slippery objects, due to the embossed texture
Additional benefits
- Available in vending machine packaging
Care for the environment
- Plastic packaging optimized, Recycled packaging
- Recycled material in the packaging: 30 %
Specific features
Unique separate liner and shell construction provides liquidproof protection
Applications
Automotive/mechanical industry
- Automotive assembly
- Part degreasing
- Surface treatment
Chemical industry
- Chemical product blending
- Handling drums of chemical products
- Manipulating valves
Other industries
- Laboratory tests
- Machine maintenance
Agriculture sector
- Spray mixtures preparation
- Pesticides handling
- Tank filling
- Application & spreading of pesticides
- Pesticides waste management
- Treatment equipment cleaning
Product detail
| Material | Nitrile |
|---|---|
| Colour | green |
| Interior finish | Textile support Mapa Technology |
| Exterior finish | Embossed texture |
| Length (cm) | 36 |
| Thickness (mm) | 0.95 |
| Size | 7 8 9 10 11 |
| Packaging | 12 pairs/bag 72 pairs/carton |
Chemical chart
OVERALL CHEMICAL PROTECTION RATING
Protection rating is determined by taking into account the effects of both permeation and degradation in an attempt to provide users with an overall protection guideline when using our glove products against specific chemicals.
Meaning of the colours :
Used for high chemical exposure or chemical immersion, limited to breakthrough time based on a working day.
Used for repeated chemical contact, limited to total chemical exposure i.e. : accumulative breakthrough time based on a working day.
Splash protection only, on chemical exposure the gloves should be discarded and new gloves worn as soon as possible.
Not recommended, these gloves are deemed unsuitable for work with this chemical.
NT: Not tested
NA: "Not applicable" because not fully tested (only degradation OR permeation results)
The chemical test data and overall chemical protection rating should not be used as the absolute basis for glove selection. Actual in-use conditions may vary glove performance from the controlled conditions of laboratory tests. Factors other than chemical contact time
| Chemical Product | CAS # | Breakthrough time (minutes) |
Permeation level |
Standard | Degradation level |
Rating |
|---|---|---|---|---|---|---|
| 1,1,1-Trichloroethane 99% | 71-55-6 | 21 | 1 | EN 374-3:2003 | 1 |
|
| 1,1,2-Trichlorotrifluoroethane (Freon TF or Freon 113) 99% | 76-13-1 | 480 | 6 | ASTM F739 | 4 |
|
| 1,2 - dichloroethane 99% | 107-06-2 | 2 | 0 | EN 16523-1:2015 | NT |
|
| 2-Butoxyethanol (Butyl Cellusolve) 99% | 111-76-2 | 372 | 5 | ASTM F739 | 4 |
|
| 2-Ethoxyethyl acetate (Cellosolve Acetate) 99% | 111-15-9 | 67 | 3 | ASTM F739 | 2 |
|
| 2-Propanol (Isopropanol) 99% | 67-63-0 | 480 | 6 | ASTM F739 | 4 |
|
| Acetaldehyde 99% | 75-07-0 | 3 | 0 | ASTM F739 | NT |
|
| Acetic acid 60% | 64-19-7 | 480 | 6 | EN 16523-1:2015 | NT |
|
| Acetic acid 99% | 64-19-7 | 51 | 2 | EN 16523-1:2015 | 2 |
|
| Acetone 99% | 67-64-1 | 3 | 0 | EN 16523-1:2015 | 1 |
|
| Acetonitrile 99% | 75-05-8 | 10 | 0 | EN 374-3:2003 | NT |
|
| Acetyl Chloride 98% | 75-36-5 | 1 | 0 | ASTM F739 | NT |
|
| Acrylic acid 99% | 79-10-7 | 55 | 2 | EN 16523-1:2015 | NT |
|
| Ammonium hydroxide solution 25% | 1336-21-6 | 217 | 4 | EN 16523-1:2015 | 4 |
|
| Ammonium hydroxide solution 29% | 1336-21-6 | 435 | 5 | ASTM F739 | 4 |
|
| Aniline 99% | 62-53-3 | 89 | 3 | ASTM F739 | 1 |
|
| Benzene 99% | 71-43-2 | 1 | 0 | EN 16523-1:2015 | 2 |
|
| Bromobenzene 99% | 108-86-1 | 11 | 1 | EN 374-3:2003 | NT |
|
| Butyl Acetate 99% | 123-86-4 | 31 | 2 | ASTM F739 | 2 |
|
| Carbon disulfide 99% | 75-15-0 | 1 | 0 | EN 16523-1:2015 | NT |
|
| Carbon Tetrachloride 99% | 56-23-5 | 114 | 3 | ASTM F739 | 4 |
|
| Chromic Acid 50% | 7738-94-5 | 250 | 5 | ASTM F739 | 4 |
|
| Cumene 98% | 98-82-8 | 166 | 4 | ASTM F739 | 3 |
|
| Cyclohexane 99% | 110-82-7 | 480 | 6 | EN 374-3:2003 | 4 |
|
| Dichloromethane (Methylene Chloride) 99% | 75-09-2 | 1 | 0 | ASTM F739 | NT |
|
| Diethanolamine 97% | 111-42-2 | 480 | 6 | ASTM F739 | 4 |
|
| Dimethylformamide 99% | 68-12-2 | 6 | 0 | EN 374-3:2003 | 1 |
|
| Dimethylsulfoxide 99% | 67-68-5 | 157 | 4 | ASTM F739 | 3 |
|
| Ethanol 95% | 64-17-5 | 218 | 4 | ASTM F739 | 4 |
|
| Ethanol 95% | 64-17-5 | 288 | 5 | ASTM F739 | 4 |
|
| Ether (Diethyl Ether) 99% | 60-29-7 | 41 | 2 | ASTM F739 | 4 |
|
| Ethyl acetate 99% | 141-78-6 | 11 | 0 | EN 16523-1:2015 | 1 |
|
| Ethyl benzene 99% | 100-41-4 | 28 | 1 | ASTM F739 | 2 |
|
| Ethylene glycol 99% | 107-21-1 | 480 | 6 | ASTM F739 | 4 |
|
| Formaldehyde 37% | 50-00-0 | 480 | 6 | EN 16523-1:2015 | 4 |
|
| Formic Acid 96% | 64-18-6 | 28 | 1 | EN 16523-1:2015 | NT |
|
| Fuel oils mixture | 68476-34-6 | 480 | 6 | EN 374-3:2003 | 3 |
|
| Furfural 99% | 98-01-1 | 34 | 2 | ASTM F739 | 1 |
|
| Hexamethylene Diisocyanate (1,6 - Diisocyanatohexane) 99,9% | 822-06-0 | NT | NT | NT | 2 |
|
| Hydrazine 35% | 302-01-2 | 480 | 6 | ASTM F739 | 4 |
|
| Hydrazine 70% | 302-01-2 | 480 | 6 | ASTM F739 | 4 |
|
| Hydrochloric acid 10% | 7647-01-0 | 480 | 6 | EN 374-3:2003 | 4 |
|
| Hydrochloric acid 35% | 7647-01-0 | NT | NT | NT | 4 |
|
| Hydrochloric acid 37% | 7647-01-0 | 480 | 6 | ASTM F739 | 4 |
|
| Hydrogen peroxide 30% | 7722-84-1 | 480 | 6 | EN 16523-1:2015 | 4 |
|
| Isobutyl alcohol 99% | 78-83-1 | 480 | 6 | ASTM F739 | 4 |
|
| Kerosene mixture | 8008-20-6 | 480 | 6 | ASTM F739 | 4 |
|
| m-Cresol 97% | 108-39-4 | 309 | 5 | ASTM F739 | 1 |
|
| Methanol 85% | 67-56-1 | NT | NT | NT | 4 |
|
| Methanol 99% | 67-56-1 | 43 | 2 | EN 16523-1:2015 | 3 |
|
| Methyl Ethyl Ketone (2-Butanone) 99% | 78-93-3 | 2 | 0 | EN 16523-1:2015 | 1 |
|
| Methylisobutylketone 99% | 108-10-1 | 25 | 1 | ASTM F739 | 2 |
|
| n-Heptane 99% | 142-82-5 | 480 | 6 | EN 16523-1:2015 | 4 |
|
| n-hexane 95% | 110-54-3 | 480 | 6 | ASTM F739 | 4 |
|
| N-N dimethyl acetamide 99% | 127-19-5 | 15 | 1 | ASTM F739 | 2 |
|
| Naphtha mixture | 8030-30-6 | 480 | 6 | ASTM F739 | 4 |
|
| Naphtha VM&P mixture | 8032-32-4 | 480 | 6 | ASTM F739 | 4 |
|
| Naphtha, Hydrotreated Heavy mixture | 64742-48-9 | 480 | 6 | EN 374-3:2003 | 4 |
|
| Nitric acid 50% | 7697-37-2 | 344 | 5 | ASTM F739 | 4 |
|
| Nitric acid 65% | 7697-37-2 | 42 | 2 | EN 16523-1:2015 | 3 |
|
| Nitrobenzene 99% | 98-95-3 | 42 | 2 | ASTM F739 | 1 |
|
| Phenol 85% | 108-95-2 | 191 | 4 | ASTM F739 | 3 |
|
| Phosphoric acid 75% | 7664-38-2 | 480 | 6 | ASTM F739 | 4 |
|
| Phosphoric acid 85% | 7664-38-2 | 480 | 6 | ASTM F739 | 4 |
|
| Phosphorous Trichloride 98% | 7719-12-2 | 16 | 1 | ASTM F739 | 1 |
|
| Potassium Fluoride 40% | 7789-23-3 | 480 | 6 | ASTM F739 | 4 |
|
| Potassium Hydroxide 50% | 1310-58-3 | 480 | 6 | EN 16523-1:2015 | 4 |
|
| Propylene Oxide 99% | 75-56-9 | 2 | 0 | ASTM F739 | NT |
|
| Sodium hydroxide 20% | 1310-73-2 | 480 | 6 | EN 374-3:2003 | 4 |
|
| Sodium hydroxide 40% | 1310-73-2 | 480 | 6 | EN 16523-1:2015 | 4 |
|
| Sodium hydroxide 50% | 1310-73-2 | 480 | 6 | EN 374-3:2003 | 4 |
|
| Spent Acid mixture | NA | 480 | 6 | ASTM F739 | NT |
|
| Styrene 99% | 100-42-5 | 10 | 1 | EN 16523-1:2015 | 1 |
|
| Sulfuric acid 10% | 7664-93-9 | 480 | 6 | EN 374-3:2003 | 4 |
|
| Sulfuric acid 40% | 7664-93-9 | 480 | 6 | EN 374-3:2003 | 4 |
|
| Sulfuric acid 50% | 7664-93-9 | 480 | 6 | ASTM F739 | 4 |
|
| Sulfuric acid 96% | 7664-93-9 | 104 | 3 | EN 16523-1:2015 | 1 |
|
| t-Butyl Methyl Ether 98% | 1634-04-4 | 452 | 5 | ASTM F739 | 4 |
|
| tert-Butyl Hydroperoxide 70% | 75-91-2 | 208 | 4 | ASTM F739 | 4 |
|
| Tetrachloroethylene (Perchloroethylene) 99% | 127-18-4 | 183 | 4 | ASTM F739 | 3 |
|
| Toluene 99% | 108-88-3 | 13 | 1 | EN 16523-1:2015 | 2 |
|
| Trichloroethylene 99% | 79-01-6 | 4 | 0 | EN 374-3:2003 | 1 |
|
| Triethanolamine 98% | 102-71-6 | 480 | 6 | ASTM F739 | 4 |
|
| Triethanolamine 99,4% | 102-71-6 | NT | NT | NT | 4 |
|
| Turpentine mixture | 8006-64-2 | 480 | 6 | ASTM F739 | 4 |
|
| Unleaded gasoline 100% | 8006-61-9 | 262 | 5 | EN 16523-1:2015 | NT |
|
| Unleaded gasoline mixture | 8006-61-9 | 52 | 2 | EN 374-3:2003 | 4 |
|
| Xylene 99% | 1330-20-7 | 22 | 1 | EN 374-3:2003 | 2 |
|
*not normalized result
Need help finding the right chemical glove?
Discover our SAFE CHEM selection tool for chemical protection!
Do you have a question? Contact us!
If you have a question, need a sample or would like further technical information about our gloves and their use.
