Vital 181
Dexterity and optimized resistance to oils and greases
Liquidproof ProtectionGallery
Specific advantages
- Added comfort and absorption of perspiration, due to the cotton flock-lining
- Chlorinated finish for better protection of products being handled
- Silicone free to prevent traces, defects on metal sheet and glass prior to painting
Applications
Mechanical industry
- Assembly of small oily parts
Other industries
- Cleaning and general maintenance in wet environments
Standards
-
1110X
-
Type B
KPT
-
Product detail
| Material | Natural latex blended nitrile |
|---|---|
| Colour | Red |
| Interior finish | Flocked |
| Exterior finish | Pebbled, chlorinated |
| Length (cm) | 31 |
| Thickness (mm) | 0.4 |
| Size | 7 8 9 |
| Packaging | 1 pair/bag 10 pairs/bag 100 pairs/carton |
Chemical chart
OVERALL CHEMICAL PROTECTION RATING
Protection rating is determined by taking into account the effects of both permeation and degradation in an attempt to provide users with an overall protection guideline when using our glove products against specific chemicals.
Meaning of the colours :
Used for high chemical exposure or chemical immersion, limited to breakthrough time based on a working day.
Used for repeated chemical contact, limited to total chemical exposure i.e. : accumulative breakthrough time based on a working day.
Splash protection only, on chemical exposure the gloves should be discarded and new gloves worn as soon as possible.
Not recommended, these gloves are deemed unsuitable for work with this chemical.
NT: Not tested
NA: "Not applicable" because not fully tested (only degradation OR permeation results)
The chemical test data and overall chemical protection rating should not be used as the absolute basis for glove selection. Actual in-use conditions may vary glove performance from the controlled conditions of laboratory tests. Factors other than chemical contact time
| Chemical Product | CAS # | Breakthrough time (minutes) |
Permeation level |
Standard | Degradation level |
Rating |
|---|---|---|---|---|---|---|
| Formaldehyde 37% | 50-00-0 | 480 | 6 | EN 16523-1:2015 | 4 |
|
| Hydrogen peroxide 30% | 7722-84-1 | 480 | 6 | EN 16523-1:2015 | 4 |
|
| Sodium hydroxide 20% | 1310-73-2 | 480 | 6 | EN 374-3:2003 | NT |
|
| Sodium hydroxide 40% | 1310-73-2 | 480 | 6 | EN 16523-1:2015 | 4 |
|
| Sodium hydroxide 50% | 1310-73-2 | 480 | 6 | EN 374-3:2003 | NT |
|
*not normalized result
